TOOLS AND PARTS ATTENDANT
This position is located in the Aviation Materiel Management section of an Army Aviation Support Facility (AASF). As a TOOLS AND PARTS ATTENDANT, WG-6904-6, you will operate a tool and parts room, used in a trades operation; determining, identifying and selecting for issue items described by users in terms of their intended usage; recommending possible substitutes and interchangeable items; determining work sequences, methods, procedures, and techniques for setting up and shifting storage locations and determining when tools and equipment should be routed to appropriate shops for test, repair or calibration. (1) Identifies user's tools, parts and equipment requirements and requisitions stock as needed. Watches and reports items that are in short supply because of breakage or are in need of repair. Recommends possible substitute or interchangeable items. Sets up, shifts and maintains storage locations. Determines methods of storage, dentification, and stock location considering such factors as temperature, humidity, height and weight limits, turnover, floor loading capacities, space available, and convenience of handling items. Compiles records concerned with quantity, cost, and type of material received, stored, and issued for a particular job. (2) Prepares periodic inventory and determines the basis for over, short, or misplaced items by checking such references as out-for-repair, issue, and turn-in records. Compiles reports on adjustments of inventory, stock records, spoilage, damage, location changes, and refusal of shipment. (3) Ensures that tools and equipment are maintained in good condition by performing visual and operating checks. May make minor repairs to tools and equipment, determine when damaged items are too costly to repair, and reports damaged or worn out equipment to superiors. (4) Determines stock replenishment levels for centrally controlled supplies within funding limitations. Assures that supplies and monies are not wasted through excess accumulation and that items are on hand in sufficient quantities and at the time required. In addition to established guides and formulas, determines quantities required and timely stock replenishment. (5) Receives a wide variety of supplies and specialized items requiring special handling. Ensures that received items are properly stored in assigned locations. Reviews requisitions for completeness and compliance with regulations and revises quantities ordered based on number on hand. Recommends substitution when supply items are not available. (6) Searches for identifying or management data on items of supply. Compares data listed on documents with reference sources such as federal catalogs, stock lists, or their publications. Receives requests needing additional information and compares with reference sources. Searches for stock number, prices, descriptions, and sources of supply. Traces part number or type number to identify equipment/item manufacturer. (7) Reviews supply transactions or provide customer service for urgent critical shortage items. Codes and classifies requisitions, shipping orders, and other documents. Refers requests to other sources of supply or an inventory control point when stock is unavailable and/or cannot be shipped. Details of the duties and responsibilities are contained in the applicable position description located online, on the FASCLASS website. https:
//acpol2.army.mil/fasclass/search_fs/search_fasclass.asp If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed online in Application Manager. GENERAL
Experience:
Experience or training which demonstrates the knowledge of trade; ability to apply identification skill (matching specific item name, models, and stock or part numbers with similar specific information at stock locations); ability to use simple hand tools (pliers, screwdrivers, etc) and to follow oral and written instructions. SPECIALIZED
Experience:
Must possess and document in detail at least 9 months of experience or training in verifying stock by opening, counting and visually checking the contents of the containers. Experience in establishing stock location by considering such factors as use, size, shape and weight of items. Experience in completing stock records by showing the names, quantities and location of stock. Experience in identifying correct nomenclature and stock number of items in order to locate stock for issue. Experience in performing maintenance such as replacing wooden handles on handsaws, changing blades on power saws, and greasing or oiling power and hand tools. NOTES TO CANDIDATES:
a. Situations of inversion of military rank are not permitted, i.e., a military technician may not be militarily senior to his or her full-time supervisor. b. Candidates may be screened and evaluated on military attributes directly related to the compatible military position required to be assigned into, such as, but not limited to, military bearing, leadership, or ability to work with others (teamwork) in a military environment. c. Include any volunteer work experience in your resume. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). d. Final selection will be based upon qualifications, suitability, and available manpower resources. e. This employer will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. f. Financial Suitability - It is the policy of the government not to deny employment simply because an individual has been unemployed or has had financial difficulties that have arisen through no fault of the individual. Information about an individual's employment experience will be used only to determine the person's qualifications and to assess his or her relative level of knowledge, skills, and abilities. Although an individual's personal conduct may be relevant in any employment decision, including conduct during periods of unemployment or evidence of dishonesty in handling financial matters, financial difficulty that has arisen through no fault of the individual will generally not itself be the basis of an unfavorable suitability or fitness determination. g. Multiple vacancies may be filled from this announcement.
Estimated Salary: $20 to $28 per hour based on qualifications.
//acpol2.army.mil/fasclass/search_fs/search_fasclass.asp If your resume does not include a narrative description of how you meet the GENERAL, SPECIALIZED experiences, and OTHER requirements, you may lose consideration for this position. Ensure that the Questionnaire is completed online in Application Manager. GENERAL
Experience:
Experience or training which demonstrates the knowledge of trade; ability to apply identification skill (matching specific item name, models, and stock or part numbers with similar specific information at stock locations); ability to use simple hand tools (pliers, screwdrivers, etc) and to follow oral and written instructions. SPECIALIZED
Experience:
Must possess and document in detail at least 9 months of experience or training in verifying stock by opening, counting and visually checking the contents of the containers. Experience in establishing stock location by considering such factors as use, size, shape and weight of items. Experience in completing stock records by showing the names, quantities and location of stock. Experience in identifying correct nomenclature and stock number of items in order to locate stock for issue. Experience in performing maintenance such as replacing wooden handles on handsaws, changing blades on power saws, and greasing or oiling power and hand tools. NOTES TO CANDIDATES:
a. Situations of inversion of military rank are not permitted, i.e., a military technician may not be militarily senior to his or her full-time supervisor. b. Candidates may be screened and evaluated on military attributes directly related to the compatible military position required to be assigned into, such as, but not limited to, military bearing, leadership, or ability to work with others (teamwork) in a military environment. c. Include any volunteer work experience in your resume. Experience refers to paid and unpaid experience, including volunteer work done through National Service programs (e.g., Peace Corps, AmeriCorps) and other organizations (e.g., professional, philanthropic, religious, spiritual, community, student, social). d. Final selection will be based upon qualifications, suitability, and available manpower resources. e. This employer will provide the Social Security Administration (SSA) and if necessary, the Department of Homeland Security (DHS) with information from each new employee's Form I-9 to confirm work authorization. f. Financial Suitability - It is the policy of the government not to deny employment simply because an individual has been unemployed or has had financial difficulties that have arisen through no fault of the individual. Information about an individual's employment experience will be used only to determine the person's qualifications and to assess his or her relative level of knowledge, skills, and abilities. Although an individual's personal conduct may be relevant in any employment decision, including conduct during periods of unemployment or evidence of dishonesty in handling financial matters, financial difficulty that has arisen through no fault of the individual will generally not itself be the basis of an unfavorable suitability or fitness determination. g. Multiple vacancies may be filled from this announcement.
- Department:
6904 Tools And Parts Attending - Salary Range:
$19.09 to $22.31 per hour
Estimated Salary: $20 to $28 per hour based on qualifications.
|
|
 | |
